Aluminum A356 is made by gravity casting followed with T6 heat treatment. Die casting is cost efficient, yet lower in mechanical strength. Sealant or sealing groove is NOT available per AA59326. DIN version with additional FPM/PU/PTFE seals.

SIZETHRDA356-T6A356-T6DIE CASTEN14420

BSPPNPTBSPPBSPP
A0501/2061050.1061050.12061050.2061050.18
A0753/4061051.1061051.12061051.2061051.18
A1001061052.1061052.12061052.2061052.18
A125061053.1061053.12061053.2061053.18
A150061054.1061054.12061054.2061054.18
A2002061055.1061055.12061055.2061055.18
A250061056.1061056.12061056.2061056.18
A3003061057.1061057.12061057.2061057.18
A4004061058.1061058.12061058.2061058.18
A5005061059.1061059.12061059.2061059.18
A6006061060.1061060.12061060.2061060.18
A8008061061.1061061.12061061.2061061.18

Brass 57 sized 1/2" to 3" are produced by forging, bigger ones by casting process. Sealant or sealing groove is NOT available per AA59326. DIN version with additional FPM/PU/PTFE seals.

SIZETHRDBR57BR57EN14420EN14420EN14420

BSPPNPTFPMPUPTFE
A0501/2061250061250.12061250.17061250.18061250.19
A0753/4061251061251.12061251.17061251.18061251.19
A1001061252061252.12061252.17061252.18061252.19
A125061253061253.12061253.17061253.18061253.19
A150061254061254.12061254.17061254.18061254.19
A2002061255061255.12061255.17061255.18061255.19
A250061256061256.12061256.17061256.18061256.19
A3003061257061257.12061257.17061257.18061257.19
A4004061258061258.12061258.17061258.18061258.19
A5005061259061259.12061259.17061259.18061259.19
A6006061260061260.12061260.17061260.18061260.19
A8008061261061261.12061261.17061261.18061261.19

Stainless steel AISI316 and 304 are made by investment casting. Other grades, like Hastalloy, are possible. Sealant or sealing groove is NOT available per AA59326. DIN version with additional FPM/PU/PTFE seals.

SIZETHRDSS316SS316SS304EN14420EN14420

BSPPNPTBSPPSS316SS304
A0501/2061150.1061150.12061150.2

A0753/4061151.1061151.12061151.2061151.18061151.28
A1001061152.1061152.12061152.2061152.18061152.28
A125061153.1061153.12061153.2061153.18061153.28
A150061154.1061154.12061154.2061154.18061154.28
A2002061155.1061155.12061155.2061155.18061155.28
A250061156.1061156.12061156.2061156.18061156.28
A3003061157.1061157.12061157.2061157.18061157.28
A4004061158.1061158.12061158.2061158.18061158.28
A5005061159.1061159.12061159.2061159.18061159.28
A6006061160.1061160.12061160.2


Polypropylene and nylon are process by material injection, PP with a recipe of ~30% glassfiber compound. Sealant or sealing groove is NOT available per AA59326.

SIZETHRDPPPPNYL

BSPPNPTBSPP
A0501/2061350.1061350.12061450
A0753/4061351.1061351.12061451
A1001061352.1061352.12061452
A125061353.1061353.12061453
A150061354.1061354.12061454
A2002061355.1061355.12061455
A250061356.1061356.12061456
A3003061357.1061357.12061457
A4004061358.1061358.12061458
A5005061359.1061359.12061459

Aluminum A356 is made by gravity casting followed with T6 heat treatment. Die casting is cost efficient, yet lower in mechanical strength.

Ribbed (2) serration is required to achieve better friction force, optionally multiple for ferrule assembly.

SIZEA356-T6A356-T6DIE CAST
RIBBEDSERRATEDRIBBED
E050065050.1065050.6065050.2
E075065051.1065051.6065051.2
E100065052.1065052.6065052.2
E125065053.1065053.6065053.2
E150065054.1065054.6065054.2
E200065055.1065055.6065055.2
E250065056.1065056.6065056.2
E300065057.1065057.6065057.2
E400065058.1065058.6065058.2
E500065059.1065059.6065059.2
E600065060.1065060.6065060.2
E800065065.1065065.6065065.2

Brass 57 sized 1/2" to 3" are produced by forging, bigger ones by casting process.

Ribbed (2) serration is required to achieve better friction force, optionally multiple for ferrule assembly. Smooth (no serration) is standard per EN14420-7.

SIZEBR57EN14420
RIBBEDSMOOTH
E050065050065050.18
E075065051065051.18
E100065052065052.18
E125065053065053.18
E150065054065054.18
E200065055065055.18
E250065056065056.18
E300065057065057.18
E400065058065058.18
E500065059
E600065060

Stainless steel AISI316 and 304 are made by investment casting. Other grades, like Hastalloy, are possible.

Ribbed (2) serration is required to achieve better friction force, optionally multiple for ferrule assembly. Smooth (no serration) is standard per EN14420-7, multiple serration possible too.

SIZESS316SS304EN14420EN14420
RIBBEDRIBBEDSMOOTHSERRATED
E050065150.1065150.2065150.18065150.19
E075065151.1065151.2065151.18065151.19
E100065152.1065152.2065152.18065152.19
E125065153.1065153.2065153.18065153.19
E150065154.1065154.2065154.18065154.19
E200065155.1065155.2065155.18065155.19
E250065156.1065156.2065156.18065156.19
E300065157.1065157.2065157.18065157.19
E400065158.1065158.2065158.18065158.19
E500065159.1065159.2

E600065160.1065160.2


Polypropylene and nylon are processed by material injection, PP with a recipe of ~30% glassfiber compound. Ribbed (2) serration is standard.

SIZEPP NYL
RIBBEDRIBBED
E050065350.1065450
E075065351.1065451
E100065352.1065452
E125065353.1065453
E150065354.1065454
E200065355.1065455
E250065356.1065456
E300065357.1065457
E400065358.1065458
E500065359.1065459

Aluminum A356 is made by gravity casting followed with T6 heat treatment. Die casting is cost efficient, yet lower in mechanical strength.

SIZETHRDA356-T6A356-T6DIE CAST

BSPTNPTBSPT
F0501/2066050.1066050.12066050.2
F0753/4066051.1066051.12066051.2
F1001066052.1066052.12066052.2
F125066053.1066053.12066053.2
F150066054.1066054.12066054.2
F2002066055.1066055.12066055.2
F250066056.1066056.12066056.2
F3003066057.1066057.12066057.2
F4004066058.1066058.12066058.2
F5005066059.1066059.12066059.2
F6006066060.1066060.12066060.2
F8008066061.1066061.12066061.2

Brass 57 sized 1/2" to 3" are produced by forging, bigger ones by casting process.

SIZETHRDBR57BR57

BSPTNPT
F0501/2066250066250.12
F0753/4066251066251.12
F1001066252066252.12
F125066253066253.12
F150066254066254.12
F2002066255066255.12
F250066256066256.12
F3003066257066257.12
F4004066258066258.12
F5005066259066259.12
F6006066260066260.12

Stainless steel AISI316 and 304 are made by investment casting. Other grades, like Hastalloy, are possible.

SIZETHRDSS316SS316SS304

BSPTNPTBSPT
F0501/2066150.1066150.12066150.2
F0753/4066151.1066151.12066151.2
F1001066152.1066152.12066152.2
F125066153.1066153.12066153.2
F150066154.1066154.12066154.2
F2002066155.1066155.12066155.2
F250066156.1066156.12066156.2
F3003066157.1066157.12066157.2
F4004066158.1066158.12066158.2
F5005066159.1066159.12066159.2
F6006066160.1066160.12066160.2

Polypropylene and nylon are processed by material injection, PP with a recipe of ~30% glassfiber compound.

SIZETHRDPPPPNYL

BSPTNPTBSPT
F0501/2066350.1066350.12066450
F0753/4066351.1066351.12066451
F1001066352.1066352.12066452
F125066353.1066353.12066453
F150066354.1066354.12066454
F2002066355.1066355.12066455
F250066356.1066356.12066456
F3003066357.1066357.12066457
F4004066358.1066358.12066458
F5005066359.1066359.12066459

Aluminum A356 is made by gravity casting followed with T6 heat treatment. Die casting is cost efficient, yet lower in mechanical strength.

SIZEA356-T6A356-T6DIE CAST
NO CHAINCS CHAINNO CHAIN
DP050068050.1068050.3068050.2
DP075068051.1068051.3068051.2
DP100068052.1068052.3068052.2
DP125068053.1068053.3068053.2
DP150068054.1068054.3068054.2
DP200068055.1068055.3068055.2
DP250068056.1068056.3068056.2
DP300068057.1068057.3068057.2
DP400068058.1068058.3068058.2
DP500068059.1068059.3068059.2
DP600068060.1068060.3068060.2
DP800068068.1068068.3068068.2

Brass 57 sized 1/2" to 3" are produced by forging, bigger ones by casting process.

SIZEBR57BR57
NO CHAINSS CHAIN
DP050068250068250.11
DP075068251068251.11
DP100068252068252.11
DP125068253068253.11
DP150068254068254.11
DP200068255068255.11
DP250068256068256.11
DP300068257068257.11
DP400068258068258.11
DP500068259068259.11
DP600068260068260.11

Stainless steel AISI316 and 304 are made by investment casting.

SIZESS316SS304
DP050068150.1068150.2
DP075068151.1068151.2
DP100068152.1068152.2
DP125068153.1068153.2
DP150068154.1068154.2
DP200068155.1068155.2
DP250068156.1068156.2
DP300068157.1068157.2
DP400068158.1068158.2
DP500068159.1068159.2
DP600068160.1068160.2

Polypropylene and nylon are processed by material injection, PP with a recipe of ~30% glassfiber compound.

SIZEPPNYL
DP050068350.1068450
DP075068351.1068451
DP100068352.1068452
DP125068353.1068453
DP150068354.1068454
DP200068355.1068455
DP250068356.1068456
DP300068357.1068457
DP400068358.1068458
DP500068359.1068459
DP600068360.1068460