Aluminum A356 is made by gravity casting followed with T6 heat treatment. Die casting is cost efficient, yet less strong. For alu-bodied couplers arms of stainless steel and brass are popular; pin, ring & clip in steel plated. Gasket of NBR or EPDM is supplied.

SIZETHRDA356-T6A356-T6A356-T6DIE CAST

BR ARMSS ARMBR ARMSS ARM

BSPTBSPTNPTBSPT
B0501/2062050.1062050.3062050.12062050.2
B0753/4062051.1062051.3062051.12062051.2
B1001062052.1062052.3062052.12062052.2
B125062053.1062053.3062053.12062053.2
B150062054.1062054.3062054.12062054.2
B2002062055.1062055.3062055.12062055.2
B250062056.1062056.3062056.12062056.2
B3003062057.1062057.3062057.12062057.2
B4004062058.1062058.3062058.12062058.2
B5005062059.1062059.3062059.12062059.2
B6006062060.1062059.3062060.12062060.2
B8008062061.1062059.3062061.12062061.2

Brass 57 sized 1/2" to 3" are produced by forging, bigger by casting process. For brass-bodied couples brass arms are popular; pin, ring & clip in steel plated. Gasket of NBR or EPDM is supplied.

SIZETHRDBR57BR57BR57

BR ARMBR ARMSS ARM

BSPTNPTBSPT
B0501/2062250.1062250.12062250.3
B0753/4062251.1062251.12062251.3
B1001062252.1062252.12062252.3
B125062253.1062253.12062253.3
B150062254.1062254.12062254.3
B2002062255.1062255.12062255.3
B250062256.1062256.12062256.3
B3003062257.1062257.12062257.3
B4004062258.1062258.12062258.3
B5005062259.1062259.12062259.3
B6006062260.1062260.12062259.3

Stainless steel AISI316 and 304 are made by investment casting. Other grades, like Hastalloy, are possible. Stainless arm package, including pin, ring and clip is standard. Gasket of NBR or EPDM is supplied.

SIZETHRDSS316SS316SS304

SS ARMSS ARMSS ARM

BSPTNPTBSPT
B0501/2062150.1062150.12062150.2
B0753/4062151.1062151.12062151.2
B1001062152.1062152.12062152.2
B125062153.1062153.12062153.2
B150062154.1062154.12062154.2
B2002062155.1062155.12062155.2
B250062156.1062156.12062156.2
B3003062157.1062157.12062157.2
B4004062158.1062158.12062158.2
B5005062159.1062159.12062159.2
B6006062160.1062160.12062159.2

Polypropylene and nylon are process by material injection, PP with a recipe of ~30% glassfiber compound. Stainless arm package is supplied. Gasket of NBR or EPDM is supplied.

SIZETHRDPPPPNYL

SS ARMSS ARMSS ARM

BSPTNPTBSPT
B0501/2062350.1062350.12062450
B0753/4062351.1062351.12062451
B1001062352.1062352.12062452
B125062353.1062353.12062453
B150062354.1062354.12062454
B2002062355.1062355.12062455
B250062356.1062356.12062456
B3003062357.1062357.12062457
B4004062358.1062358.12062458
B5005062359.1062359.12062459

Aluminum A356 is made by gravity casting followed with T6 heat treatment. Die casting is cost efficient, yet less strong. Stainless steel or brass arm package is of choice, in combination with NBR or EPDM gasket.

Ribbed (2) serration is required to achieve better friction force, optionally multiple for ferrule assembly. Smooth (no serration) is standard per EN14420-7, multiple serration possible too.

SIZEA356-T6A356-T6A356-T6DIE CAST
BR ARMSS ARMSS ARMSS ARM
RIBBEDRIBBEDSERRATEDRIBBED
C050063050.1063050.3063050.6063050.2
C075063051.1063051.3063051.6063051.2
C100063052.1063052.3063052.6063052.2
C125063053.1063053.3063053.6063053.2
C150063054.1063054.3063054.6063054.2
C200063055.1063055.3063055.6063055.2
C250063056.1063056.3063056.6063056.2
C300063057.1063057.3063057.6063057.2
C400063058.1063058.3063058.6063058.2
C500063059.1063059.3063059.6063059.2
C600063060.1063059.3063060.6063060.2
C800063061.1063059.3063061.6063061.2

Brass 57 sized 1/2" to 3" are produced by forging, bigger ones by casting process. Brass arm package is standard. NBR or EPDM gasket is of choice.

Ribbed (2) serration is required to achieve better friction force, optionally multiple for ferrule assembly. Smooth (no serration) is standard per EN14420-7, multiple serration possible too.

SIZEBR57BR57EN14420EN14420EN14420
BR ARMSS ARMBR ARMBR ARMSS ARM
RIBBEDRIBBEDSMOOTHSERRATEDSMOOTH
C050063250063250.3063250.19063250.181063250.18
C075063251063251.3063251.19063251.181063251.18
C100063252063252.3063252.19063252.181063252.18
C125063253063253.3063253.19063253.181063253.18
C150063254063254.3063254.19063254.181063254.18
C200063255063255.3063255.19063255.181063255.18
C250063256063256.3063256.19063256.181063256.18
C300063257063257.3063257.19063257.181063257.18
C400063258063258.3063258.19063258.181063258.18
C500063259063259.3063259.19063259.181063259.18
C600063260063259.3063260.19063260.181063260.18

Stainless steel AISI316 and 304 are made by investment casting. Other grades, like Hastalloy, are possible. Stainless package of arm, pin, ring and clip is standard. NBR or EPDM gasket is optional.

Ribbed (2) serration is required to achieve better friction force, optionally multiple for ferrule assembly. Smooth (no serration) is standard per EN14420-7, multiple possible too.

SIZESS316SS304EN14420EN14420
SS ARMSS ARMSS ARMSS ARM
RIBBEDRIBBEDSMOOTHSERRATED
C050063150.1063150.2063150.18063150.19
C075063151.1063151.2063151.18063151.19
C100063152.1063152.2063152.18063152.19
C125063153.1063153.2063153.18063153.19
C150063154.1063154.2063154.18063154.19
C200063155.1063155.2063155.18063155.19
C250063156.1063156.2063156.18063156.19
C300063157.1063157.2063157.18063157.19
C400063158.1063158.2063158.18063158.19
C500063159.1063159.2063159.18063159.19
C600063160.1063159.2063160.18063160.19

Polypropylene and nylon are processed by material injection, PP with a recipe of ~30% glassfiber compound. Stainless steel package of arm, pin, ring and clip is supplied. NBR or EPDM gasket is optional. Ribbed (2) serration is standard.

SIZEPPNYL
SS ARMSS ARM
RIBBEDRIBBED
C050063350.1063350
C075063351.1063351
C100063352.1063352
C125063353.1063353
C150063354.1063354
C200063355.1063355
C250063356.1063356
C300063357.1063357
C400063358.1063358
C500063359.1063359
C600063360.1063359

Aluminum A356 is made by gravity casting followed with T6 heat treatment. Die casting is cost efficient, yet less strong. For alu-bodied couplers arms of stainless steel and brass are popular; pin, ring & clip in steel plated. Gasket of material NBR or EPDM is fitted. Sealant or sealing groove is NOT available per AA59326. DIN version with additional FPM/PU/PTFE seals.

SIZETHRDA356-T6A356-T6A356-T6DIE CASTEN14420

BR ARMSS ARMBR ARMSS ARMSS ARM

BSPPBSPPNPTBSPPBSPP
D050 1/2064050.1064050.3064050.12064050.2
D075 3/4064051.1064051.3064051.12064051.2064051.18
D100 1064052.1064052.3064052.12064052.2064052.18
D125 064053.1064053.3064053.12064053.2064053.18
D150 064054.1064054.3064054.12064054.2064054.18
D200 2064055.1064055.3064055.12064055.2064055.18
D250 064056.1064056.3064056.12064056.2064056.18
D300 3064057.1064057.3064057.12064057.2064057.18
D400 4064058.1064058.3064058.12064058.2064058.18
D500 5064059.1064059.3064059.12064059.2
D600 6064060.1064059.3064060.12064060.2
D800 8064061.1064059.3064061.12064061.2

Brass 57 sized 1/2" to 3" are produced by forging, bigger ones by casting process. Brass package of arm, pin, ring and clip is standard. NBR or EPDM gasket is provided. No sealant per AA59326, FPM/PU/PTFE for EN14420-7.

SIZETHRDBR57BR57BR57EN14420EN14420

BR ARMSS ARMBR ARMBR ARMSS ARM

BSPPBSPPNPTBSPPBSPP
D050 1/2064250064250.3064250.12064250.19064250.17
D075 3/4064251064251.3064251.12064251.19064251.17
D100 1064252064252.3064252.12064252.19064252.17
D125 064253064253.3064253.12064253.19064253.17
D150 064254064254.3064254.12064254.19064254.17
D200 2064255064255.3064255.12064255.19064255.17
D250 064256064256.3064256.12064256.19064256.17
D300 3064257064257.3064257.12064257.19064257.17
D400 4064258064258.3064258.12064258.19064258.17
D500 5064259064259.3064259.12064259.19064259.17
D600 6064260064259.3064260.12064260.1906426017

Stainless steel AISI316 and 304 are made by investment casting. Other grades, like Hastalloy, are possible. SS arm, pin, ring and clip is supplied. NBR or EPDM gasket is inserted. PTFE sealing ring is used per EN14420-7.

SIZETHRDBR57BR57BR57EN14420EN14420

BR ARMSS ARMBR ARMBR ARMSS ARM

BSPPBSPPNPTBSPPBSPP
D0501/2064150.1064150.12064150.2
D0753/4064151.1064151.12064151.2064151.18064151.17
D1001064152.1064152.12064152.2064152.18064152.17
D125064153.1064153.12064153.2064153.18064153.17
D150064154.1064154.12064154.2064154.18064154.17
D2002064155.1064155.12064155.2064155.18064155.17
D250064156.1064156.12064156.2064156.18064156.17
D3003064157.1064157.12064157.2064157.18064157.17
D4004064158.1064158.12064158.2064158.18064158.17
D5005064159.1064159.12064159.2
D600 6 064160.1 064160.12 064160.2
D8008064161.1064161.12064161.2

Polypropylene and nylon are processed by material injection, PP with a recipe of ~30% glassfiber compound. Stainless arm, pin, ring and clip is standard. Gasket of NBR, EPDM is possible. No sealing ring per AA59326.

SIZETHRDPPPPNYL

SS ARMSS ARMSS ARM

BSPPNPTBSPP
D0501/2064350.1064350.12064350
D0753/4064351.1064351.12064351
D1001064352.1064352.12064352
D125064353.1064353.12064353
D150064354.1064354.12064354
D2002064355.1064355.12064355
D250064356.1064356.12064356
D3003064357.1064357.12064357
D4004064358.1064358.12064358
D5005064359.1064359.12064359
D6006064360.1064360.12064360
D8008064361.1064361.12064361

Aluminum A356 is made by gravity casting followed with T6 heat treatment. Die casting is cost efficient, yet less strong. Stainless steel or brass arm package is of choice, in combination with NBR or EPDM gasket. Steel chain is optional on request.

SIZEA356-T6A356-T6DIE CASTDIE CAST
BR ARMSS ARMBR ARMSS ARM
DC050067050.1067050.3067050.4067050.2
DC075067051.1067051.3067051.4067051.2
DC100067052.1067052.3067052.4067052.2
DC125067053.1067053.3067053.4067053.2
DC150067054.1067054.3067054.4067054.2
DC200067055.1067055.3067055.4067055.2
DC250067056.1067056.3067056.4067056.2
DC300067057.1067057.3067057.4067057.2
DC400067058.1067058.3067058.4067058.2
DC500067059.1067059.3067059.4067059.2
DC600067060.1067059.3067060.4067060.2
DC800067061.1067059.3067061.4067061.2

Aluminum A356 is made by gravity casting followed with T6 heat treatment. Stainless steel 90° bent arm is supplied in combination with NBR gasket. Steel chain is optional on request.

SIZEA356-T6
SS 90° ARM
DC200067546
DC300067547
DC400067548

Brass 57 sized 1/2" to 3" are produced by forging, bigger ones by casting process. Brass arm package including pin, ring and clip is standard, chain in CS or SS optional on request. NBR or EPDM can be provided.

SIZEBR57BR57BR57
BR ARMBR ARMSS ARM
NO CHAINSS CHAINNO CHAIN
DC050067250067250.11067250.3
DC075067251067251.11067251.3
DC100067252067252.11067252.3
DC125067253067253.11067253.3
DC150067254067254.11067254.3
DC200067255067255.11067255.3
DC250067256067256.11067256.3
DC300067257067257.11067257.3
DC400067258067258.11067258.3
DC500067259067259.11067259.3
DC600067260067259.11067260.3

Stainless steel AISI316 and 304 are made by investment casting. Other grades, like Hastalloy, are possible. Stainless package of arm, pin, ring and clip is standard with and without stainless steel chain. NBR or EPDM gasket is inserted.

SIZESS316SS316SS304
SS ARMSS ARMSS ARM
NO CHAINSS CHAINNO CHAIN
DC050067150.1067150.11067150.2
DC075067151.1067151.11067151.2
DC100067152.1067152.11067152.2
DC125067153.1067153.11067153.2
DC150067154.1067154.11067154.2
DC200067155.1067155.11067155.2
DC250067156.1067156.11067156.2
DC300067157.1067157.11067157.2
DC400067158.1067158.11067158.2
DC500067159.1067159.11067159.2
DC600067160.1067160.11067160.2

Polypropylene and nylon are processed by material injection, PP with a recipe of ~30% glassfiber compound. Stainless package of arm, pin, ring and clip is standard. Chain is optional on request. NBR or EPDM gasket is attached.

SIZEPPNYL
SS ARMSS ARM
DC050063350.1063450
DC075063351.1063451
DC100063352.1063452
DC125063353.1063453
DC150063354.1063454
DC200063355.1063455
DC250063356.1063456
DC300063357.1063457
DC400063358.1063458
DC500063359.1063459