high pressure fittings

High Pressure Screw Nipple

High pressure fittings include forge fabricated carbon and stainless alloyed fittings, with pipe thread and welding joints, and with pressure to 2.000, 3.000, 6.000 and 9.000 LBs, designed in compliance with ASME B16.11 and MSS-SP.

Screw nipples include forged carbon-alloy and stainless steel made Hex Nipple and Swage Nipple Concentric and Eccentric, sizing NPS 1/8~4in to ANSI/ASME B1.20.1-1983-NPT and MSS-SP-95-2000. They are in general made from raw round bar of diameter 19~85mm.

Screw Nipple NPT, Full Size

[High Pressure, ASME B1.20.1]

screw nipple npt full size
Standard Materials Body — Forged Carbon steel ASTM A105, A350 LF2, A106, A312, A234, A403; and Stainless steel ASTM A182, F304, F304L, F316, F316L, F304H, F316H, F317L, F321, F11, F22, F91
Finishing Treatment Carbon steel — Galvanized or black treated;
Stainless steel — Pickled
General Weight See Table of weight list
Dimensions in Millimeters
high pressure screw nipple npt full size
NPS
Inch
C L1 L d H
3.000 6.000
1/8 6.0 10.0 26.0 4.0   12.0
1/4 8.0 14.0 36.0 6.4   17.0
3/8 8.0 14.0 36.0 9.2 4.3 19.0
1/2 9.0 19.0 47.0 11.8 6.4 24.0
3/4 10.0 19.0 48.0 15.6 11.1 30.0
1 11.0 24.0 59.0 20.7 15.2 35.0
12.0 24.0 60.0 29.5 22.8 46.0
14.0 24.0 62.0 34.0 28.0 50.0
2 16.0 26.0 68.0 42.9 38.2 65.0
18.0 38.0 94.0 53.8   80.0
3 20.0 40.0 100.0 66.5   95.0
4 24.5 40.0 105.0 87.3   125.5

Screw Nipple NPT, Reduce Size

[High Pressure, ASME B1.20.1]

Standard Materials Body — Forged Carbon steel ASTM A105, A350 LF2, A106, A312, A234, A403; and Stainless steel ASTM A182, F304, F304L, F316, F316L, F304H, F316H, F317L, F321, F11, F22, F91
Finishing Treatment Carbon steel — Galvanized or black treated;
Stainless steel — Pickled
General Weight See Table of weight list
Dimensions in Millimeters
high pressure screw nipple npt reduce size
NPS
Inch
C L1 L2 L d H
3.000 6.000
3/8×1/4 8.0 14.0 14.0 36.0 6.4   19.0
1/2×1/4 9.0 19.0 14.0 42.0 6.4   24.0
1/2×3/8 9.0 19.0 14.0 42.0 9.2 4.3 24.0
3/4×1/4 10.0 19.0 14.0 43.0 6.4   30.0
3/4×3/8 10.0 19.0 14.0 43.0 9.2 4.3 30.0
3/4×1/2 10.0 19.0 19.0 48.0 11.8 6.4 30.0
1×3/8 11.0 24.0 14.0 49.0 9.2 4.3 35.0
1×1/2 11.0 24.0 19.0 54.0 11.8 6.4 35.0
1×3/4 11.0 24.0 19.0 54.0 15.6 11.1 35.0
1¼×1/2 12.0 24.0 19.0 55.0 11.8 6.4 46.0
1¼×3/4 12.0 24.0 19.0 55.0 15.6 11.1 46.0
1¼×1 12.0 24.0 24.0 60.0 20.7 15.2 46.0
1½×3/4 14.0 24.0 19.0 57.0 15.6 11.1 50.0
1½×1 14.0 24.0 24.0 62.0 20.7 15.2 50.0
1½×1¼ 14.0 24.0 24.0 62.0 29.5 22.8 50.0
2×1 16.0 26.0 24.0 66.0 20.7 15.2 65.0
2×1¼ 16.0 26.0 24.0 66.0 29.5 22.8 65.0
2×1½ 16.0 26.0 24.0 66.0 34.0 28.0 65.0
2½×1¼ 18.0 38.0 24.0 80.0 29.5 22.8 80.0
2½×1½ 18.0 38.0 24.0 80.0 34.0 28.0 80.0
2½×2 18.0 38.0 26.0 82.0 42.9 38.2 80.0
3×1/2 20.0 40.0 24.0 84.0 34.0 28.0 95.0
3×2 20.0 40.0 26.0 86.0 42.9 38.2 95.0
3×2½ 20.0 40.0 38.0 98.0 53.8   95.0

Plain-End Swage Nipple, Concentric & Eccentric

[High Pressure, MSS-SP-95-2000]

Standard Materials Body — Forged Carbon steel ASTM A105, A350 LF2, A106, A312, A234, A403; and Stainless steel ASTM A182, F304, F304L, F316, F316L, F304H, F316H, F317L, F321, F11, F22, F91
Finishing Treatment Carbon steel — Galvanized or black treated;
Stainless steel — Pickled
General Weight See Table of weight list
Dimensions in Millimeters
plain end swage nipple concentric and eccentric
NPS
Inch
Outside Dia. End
to
End
A
Wall Thickness
Large
End
D1
Small
End
D2
T1 T2
Sch.
40
Sch.
80
Sch.
160
XXS Sch.
40
Sch.
80
Sch.
160
XXS
1/4×1/8 13.7 10.3 57 2.2 3.0 3.7 6.1 1.7 2.4 3.2 4.8
3/8×1/2 17.1 10.3 64 2.3 3.2 4.0 6.4 1.7 2.4 3.2 4.8
3/8×1/4 17.1 13.7 64 2.3 3.2 4.0 6.4 2.2 3.0 3.7 6.1
1/2×1/8 21.3 10.3 70 2.8 3.7 4.7 7.5 1.7 2.4 3.2

4.8

1/2×1/4 21.3 13.7 70 2.8 3.7 4.7 7.5 2.2 3.0 3.7 6.1
1/2×3/8 21.3 17.1 70 2.8 3.7 4.7 7.5 2.3 3.2 4.0 6.4
3/4×1/8 26.7 10.3 76 2.9 3.9 5.5 7.8 1.7 2.4 3.2 4.8
3/4×1/4 26.7 13.7 76 2.9 3.9 5.5 7.8 2.2 3.0 3.7 6.1
3/4×3/8 26.7 17.1 76 2.9 3.9 5.5 7.8 2.3 3.2 4.0 6.4
3/4×1/2 26.7 21.3 76 2.9 3.9 5.5 7.8 2.8 3.7 4.7 7.5
1×1/8 33.4 10.3 89 3.4 4.5 6.4 9.1 1.7 2.4 3.2 4.8
1×1/4 33.4 13.7 89 3.4 4.5 6.4 9.1 2.2 3.0 3.7 6.1
1×3/8 33.4 17.1 89 3.4 4.5 6.4 9.1 2.3 3.2 4.0 6.4
1×1/2 33.4 21.3 89 3.4 4.5 6.4 9.1 2.8 3.7 4.7 7.5
1×3/4 33.4 26.7 89 3.4 4.5 6.4 9.1 2.9 3.9 5.5 7.8
1¼×1/8 42.2 10.3 102 3.6 4.9 6.4 9.7 1.7 2.4 3.2 4.8
1¼×1/4 42.2 13.7 102 3.6 4.9 6.4 9.7 2.2 3.0 3.7 6.1
1¼×3/8 42.2 17.1 102 3.6 4.9 6.4 9.7 2.3 3.2 4.0 6.4
1¼×1/2 42.2 21.3 102 3.6 4.9 6.4 9.7 2.8 3.7 4.7 7.5
1¼×3/4 42.2 26.7 102 3.6 4.9 6.4 9.7 2.9 3.9 5.5 7.8
1¼×1 42.2 33.4 102 3.6 4.9 6.4 9.7 3.4 4.5 6.4 9.1
1½×1/8 48.3 10.3 114 3.7 5.1 7.1 10.2 1.7 2.4 3.2 4.8
1½×1/4 48.3 13.7 114 3.7 5.1 7.1 10.2 2.2 3.0 3.7 6.1
1½×3/8 48.3 17.1 114 3.7 5.1 7.1 10.2 2.3 3.2 4.0 6.4
1½×1/2 48.3 21.3 114 3.7 5.1 7.1 10.2 2.8 3.7 4.7 7.5
1½×3/4 48.3 26.7 114 3.7 5.1 7.1 10.2 2.9 3.9 5.5 7.8
1½×1 48.3 33.4 114 3.7 5.1 7.1 10.2 3.4 4.5 6.4 9.1
1½×1¼ 48.3 42.2 114 3.7 5.1 8.7 10.2 3.6 4.9 6.4 9.7
2×1/8 60.3 10.3 165 3.9 5.5 8.7 11.1 1.7 2.4 3.2 4.8
2×1/4 60.3 13.7 165 3.9 5.5 8.7 11.1 2.2 3.0 3.7 6.1
2×3/8 60.3 17.1 165 3.9 5.5 8.7 11.1 2.3 3.2 4.0 6.4
2×1/2 60.3 21.3 165 3.9 5.5 8.7 11.1 2.8 3.7 4.7 7.5
2×3/4 60.3 26.7 165 3.9 5.5 8.7 11.1 2.9 3.9 5.5 7.8
2×1 60.3 33.4 165 3.9 5.5 8.7 11.1 3.4 4.5 6.4 9.1
2×1¼ 60.3 42.2 165 3.9 5.5 8.7 11.1 3.6 4.9 6.4 9.7
2×1½ 60.3 48.3 165 3.9 5.5 8.7 11.1 3.7 5.1 7.1 10.2
2½×1/8 73.0 10.3 178 5.2 7.0 9.5 14.0 1.7 2.4 3.2 4.8
2½×1/4 73.0 13.7 178 5.2 7.0 9.5 14.0 2.2 3.0 3.7 6.1
2½×3/8 73.0 17.1 178 5.2 7.0 9.5 14.0 2.3 3.2 4.0 6.4
2½×1/2 73.0 21.3 178 5.2 7.0 9.5 14.0 2.8 3.7 4.7 7.5
2½×3/4 73.0 26.7 178 5.2 7.0 9.5 14.0 2.9 3.9 5.5 7.8
2½×1 73.0 33.4 178 5.2 7.0 9.5 14.0 3.4 4.5 6.4 9.1
2½×1¼ 73.0 42.2 178 5.2 7.0 9.5 14.0 3.6 4.9 6.4 9.7
2½×1½ 73.0 48.3 178 5.2 7.0 9.5 14.0 3.7 5.1 7.1 10.2
2½×2 73.0 60.3 178 5.2 7.0 9.5 14.0 3.9 5.5 8.7 11.1
3×1/8 88.9 10.3 203 5.5 7.6 11.5 15.2 1.7 2.4 3.2 4.8
3×1/4 88.9 13.7 203 5.5 7.6 11.5 15.2 2.2 3.0 3.7 6.1
3×3/8 88.9 17.1 203 5.5 7.6 11.5 15.2 2.3 3.2 4.0 6.4
3×1/2 88.9 21.3 203 5.5 7.6 11.5 15.2 2.8 3.7 4.7 7.5
3×3/4 88.9 26.7 203 5.5 7.6 11.5 15.2 2.9 3.9 5.5 7.8
3×1 88.9 33.4 203 5.5 7.6 11.5 15.2 3.4 4.5 6.4 9.1
3×1¼ 88.9 42.2 203 5.5 7.6 11.5 15.2 3.6 4.9 6.4 9.7
3×1½ 88.9 48.3 203 5.5 7.6 11.5 15.2 3.7 5.1 7.1 10.2
3×2 88.9 60.3 203 5.5 7.6 11.5 15.2 3.9 5.5 8.7 11.1
3×2½ 88.9 73.0 203 5.5 7.6 11.5 15.2 5.2 7.0 9.5 14.0
3½×1/8 101.6 10.3 203 5.7 8.1     1.7 2.4 3.2 4.8
3½×1/4 101.6 13.7 203 5.7 8.1     2.2 3.0 3.7 6.1
3½×3/8 101.6 17.1 203 5.7 8.1     2.3 3.2 4.0 6.4
3½×1/2 101.6 21.3 203 5.7 8.1     2.8 3.7 4.7 7.5
3½×3/4 101.6 26.7 203 5.7 8.1     2.9 3.9 5.5 7.8
3½×1 101.6 33.4 203 5.7 8.1     3.4 4.5 6.4 9.1
3½×1¼ 101.6 42.2 203 5.7 8.1     3.6 4.9 6.4 9.7
3½×1½ 101.6 48.3 203 5.7 8.1     3.7 5.1 7.1 10.2
3½×2 101.6 60.3 203 5.7 8.1     3.9 5.5 8.7 11.1
3½×2½ 101.6 73.0 203 5.7 8.1     5.2 7.0 9.5 14.0
3½×3 101.6 88.9 203 5.7 8.1     5.5 7.6 11.5 15.2
4×1/4 114.3 13.7 229 6.0 8.6 13.5 17.1 2.2 3.0 3.7 6.1
4×3/8 114.3 17.1 229 6.0 8.6 13.5 17.1 2.3 3.2 4.0 6.4
4×1/2 114.3 21.3 229 6.0 8.6 13.5 17.1 2.8 3.7 4.7 7.5
4×3/4 114.3 26.7 229 6.0 8.6 13.5 17.1 2.9 3.9 5.5 7.8
4×1 114.3 33.4 229 6.0 8.6 13.5 17.1 3.4 4.5 6.4 9.1
4×1¼ 114.3 42.2 229 6.0 8.6 13.5 17.1 3.6 4.9 6.4 9.
4×1½ 114.3 48.3 229 6.0 8.6 13.5 17.1 3.7 5.1 7.1 710.2
4×2 114.3 60.3 229 6.0 8.6 13.5 17.1 3.9 5.5 8.7 11.1
4×2½ 114.3 73.0 229 6.0 8.6 13.5 17.1 5.2 7.0 9.5 14.0
4×3 114.3 88.9 229 6.0 8.6 13.5 17.1 5.5 7.6 11.5 15.2
4×3½ 114.3 101.6 229 6.0 8.6 13.5 17.1 5.7 8.1    

Screw Swage Nipple, Concentric & Eccentric

[High Pressure, MSS-SP-95-2000]

screw swage nipple concentric and eccentric
Standard Materials Body — Forged Carbon steel ASTM A105, A350 LF2, A106, A312, A234, A403; and Stainless steel ASTM A182, F304, F304L, F316, F316L, F304H, F316H, F317L, F321, F11, F22, F91
Finishing Treatment Carbon steel — Galvanized or black treated;
Stainless steel — Pickled
General Weight See Table of weight list
Dimensions in Millimeters
screw swage nipple concentric and eccentric
NPS
Inch
Outside Dia. End
to
End
A
Wall Thickness
Large
End
D1
Small
End
D2
T1 T2
Sch.
40
Sch.
80
Sch.
160
XXS Sch.
40
Sch.
80
Sch.
160
XXS
1/4×1/8 13.7 10.3 57 2.2 3.0 3.7 6.1 1.7 2.4 3.2 4.8
3/8×1/2 17.1 10.3 64 2.3 3.2 4.0 6.4 1.7 2.4 3.2 4.8
3/8×1/4 17.1 13.7 64 2.3 3.2 4.0 6.4 2.2 3.0 3.7 6.1
1/2×1/8 21.3 10.3 70 2.8 3.7 4.7 7.5 1.7 2.4 3.2

4.8

1/2×1/4 21.3 13.7 70 2.8 3.7 4.7 7.5 2.2 3.0 3.7 6.1
1/2×3/8 21.3 17.1 70 2.8 3.7 4.7 7.5 2.3 3.2 4.0 6.4
3/4×1/8 26.7 10.3 76 2.9 3.9 5.5 7.8 1.7 2.4 3.2 4.8
3/4×1/4 26.7 13.7 76 2.9 3.9 5.5 7.8 2.2 3.0 3.7 6.1
3/4×3/8 26.7 17.1 76 2.9 3.9 5.5 7.8 2.3 3.2 4.0 6.4
3/4×1/2 26.7 21.3 76 2.9 3.9 5.5 7.8 2.8 3.7 4.7 7.5
1×1/8 33.4 10.3 89 3.4 4.5 6.4 9.1 1.7 2.4 3.2 4.8
1×1/4 33.4 13.7 89 3.4 4.5 6.4 9.1 2.2 3.0 3.7 6.1
1×3/8 33.4 17.1 89 3.4 4.5 6.4 9.1 2.3 3.2 4.0 6.4
1×1/2 33.4 21.3 89 3.4 4.5 6.4 9.1 2.8 3.7 4.7 7.5
1×3/4 33.4 26.7 89 3.4 4.5 6.4 9.1 2.9 3.9 5.5 7.8
1¼×1/8 42.2 10.3 102 3.6 4.9 6.4 9.7 1.7 2.4 3.2 4.8
1¼×1/4 42.2 13.7 102 3.6 4.9 6.4 9.7 2.2 3.0 3.7 6.1
1¼×3/8 42.2 17.1 102 3.6 4.9 6.4 9.7 2.3 3.2 4.0 6.4
1¼×1/2 42.2 21.3 102 3.6 4.9 6.4 9.7 2.8 3.7 4.7 7.5
1¼×3/4 42.2 26.7 102 3.6 4.9 6.4 9.7 2.9 3.9 5.5 7.8
1¼×1 42.2 33.4 102 3.6 4.9 6.4 9.7 3.4 4.5 6.4 9.1
1½×1/8 48.3 10.3 114 3.7 5.1 7.1 10.2 1.7 2.4 3.2 4.8
1½×1/4 48.3 13.7 114 3.7 5.1 7.1 10.2 2.2 3.0 3.7 6.1
1½×3/8 48.3 17.1 114 3.7 5.1 7.1 10.2 2.3 3.2 4.0 6.4
1½×1/2 48.3 21.3 114 3.7 5.1 7.1 10.2 2.8 3.7 4.7 7.5
1½×3/4 48.3 26.7 114 3.7 5.1 7.1 10.2 2.9 3.9 5.5 7.8
1½×1 48.3 33.4 114 3.7 5.1 7.1 10.2 3.4 4.5 6.4 9.1
1½×1¼ 48.3 42.2 114 3.7 5.1 8.7 10.2 3.6 4.9 6.4 9.7
2×1/8 60.3 10.3 165 3.9 5.5 8.7 11.1 1.7 2.4 3.2 4.8
2×1/4 60.3 13.7 165 3.9 5.5 8.7 11.1 2.2 3.0 3.7 6.1
2×3/8 60.3 17.1 165 3.9 5.5 8.7 11.1 2.3 3.2 4.0 6.4
2×1/2 60.3 21.3 165 3.9 5.5 8.7 11.1 2.8 3.7 4.7 7.5
2×3/4 60.3 26.7 165 3.9 5.5 8.7 11.1 2.9 3.9 5.5 7.8
2×1 60.3 33.4 165 3.9 5.5 8.7 11.1 3.4 4.5 6.4 9.1
2×1¼ 60.3 42.2 165 3.9 5.5 8.7 11.1 3.6 4.9 6.4 9.7
2×1½ 60.3 48.3 165 3.9 5.5 8.7 11.1 3.7 5.1 7.1 10.2
2½×1/8 73.0 10.3 178 5.2 7.0 9.5 14.0 1.7 2.4 3.2 4.8
2½×1/4 73.0 13.7 178 5.2 7.0 9.5 14.0 2.2 3.0 3.7 6.1
2½×3/8 73.0 17.1 178 5.2 7.0 9.5 14.0 2.3 3.2 4.0 6.4
2½×1/2 73.0 21.3 178 5.2 7.0 9.5 14.0 2.8 3.7 4.7 7.5
2½×3/4 73.0 26.7 178 5.2 7.0 9.5 14.0 2.9 3.9 5.5 7.8
2½×1 73.0 33.4 178 5.2 7.0 9.5 14.0 3.4 4.5 6.4 9.1
2½×1¼ 73.0 42.2 178 5.2 7.0 9.5 14.0 3.6 4.9 6.4 9.7
2½×1½ 73.0 48.3 178 5.2 7.0 9.5 14.0 3.7 5.1 7.1 10.2
2½×2 73.0 60.3 178 5.2 7.0 9.5 14.0 3.9 5.5 8.7 11.1
3×1/8 88.9 10.3 203 5.5 7.6 11.5 15.2 1.7 2.4 3.2 4.8
3×1/4 88.9 13.7 203 5.5 7.6 11.5 15.2 2.2 3.0 3.7 6.1
3×3/8 88.9 17.1 203 5.5 7.6 11.5 15.2 2.3 3.2 4.0 6.4
3×1/2 88.9 21.3 203 5.5 7.6 11.5 15.2 2.8 3.7 4.7 7.5
3×3/4 88.9 26.7 203 5.5 7.6 11.5 15.2 2.9 3.9 5.5 7.8
3×1 88.9 33.4 203 5.5 7.6 11.5 15.2 3.4 4.5 6.4 9.1
3×1¼ 88.9 42.2 203 5.5 7.6 11.5 15.2 3.6 4.9 6.4 9.7
3×1½ 88.9 48.3 203 5.5 7.6 11.5 15.2 3.7 5.1 7.1 10.2
3×2 88.9 60.3 203 5.5 7.6 11.5 15.2 3.9 5.5 8.7 11.1
3×2½ 88.9 73.0 203 5.5 7.6 11.5 15.2 5.2 7.0 9.5 14.0
3½×1/8 101.6 10.3 203 5.7 8.1     1.7 2.4 3.2 4.8
3½×1/4 101.6 13.7 203 5.7 8.1     2.2 3.0 3.7 6.1
3½×3/8 101.6 17.1 203 5.7 8.1     2.3 3.2 4.0 6.4
3½×1/2 101.6 21.3 203 5.7 8.1     2.8 3.7 4.7 7.5
3½×3/4 101.6 26.7 203 5.7 8.1     2.9 3.9 5.5 7.8
3½×1 101.6 33.4 203 5.7 8.1     3.4 4.5 6.4 9.1
3½×1¼ 101.6 42.2 203 5.7 8.1     3.6 4.9 6.4 9.7
3½×1½ 101.6 48.3 203 5.7 8.1     3.7 5.1 7.1 10.2
3½×2 101.6 60.3 203 5.7 8.1     3.9 5.5 8.7 11.1
3½×2½ 101.6 73.0 203 5.7 8.1     5.2 7.0 9.5 14.0
3½×3 101.6 88.9 203 5.7 8.1     5.5 7.6 11.5 15.2
4×1/4 114.3 13.7 229 6.0 8.6 13.5 17.1 2.2 3.0 3.7 6.1
4×3/8 114.3 17.1 229 6.0 8.6 13.5 17.1 2.3 3.2 4.0 6.4
4×1/2 114.3 21.3 229 6.0 8.6 13.5 17.1 2.8 3.7 4.7 7.5
4×3/4 114.3 26.7 229 6.0 8.6 13.5 17.1 2.9 3.9 5.5 7.8
4×1 114.3 33.4 229 6.0 8.6 13.5 17.1 3.4 4.5 6.4 9.1
4×1¼ 114.3 42.2 229 6.0 8.6 13.5 17.1 3.6 4.9 6.4 9.
4×1½ 114.3 48.3 229 6.0 8.6 13.5 17.1 3.7 5.1 7.1 710.2
4×2 114.3 60.3 229 6.0 8.6 13.5 17.1 3.9 5.5 8.7 11.1
4×2½ 114.3 73.0 229 6.0 8.6 13.5 17.1 5.2 7.0 9.5 14.0
4×3 114.3 88.9 229 6.0 8.6 13.5 17.1 5.5 7.6 11.5 15.2
4×3½ 114.3 101.6 229 6.0 8.6 13.5 17.1 5.7 8.1    

Bevel Swage Nipple, Concentric & Eccentric

[High Pressure, MSS-SP-95-2000]

Standard Materials Body — Forged Carbon steel ASTM A105, A350 LF2, A106, A312, A234, A403; and Stainless steel ASTM A182, F304, F304L, F316, F316L, F304H, F316H, F317L, F321, F11, F22, F91
Finishing Treatment Carbon steel — Galvanized or black treated;
Stainless steel — Pickled
General Weight See Table of weight list
Dimensions in Millimeters
bevel swage nipple concentric and eccentric
NPS
Inch
Outside Dia. End
to
End
A
Wall Thickness
Large
End
D1
Small
End
D2
T1 T2
Sch.
40
Sch.
80
Sch.
160
XXS Sch.
40
Sch.
80
Sch.
160
XXS
1/4×1/8 13.7 10.3 57 2.2 3.0 3.7 6.1 1.7 2.4 3.2 4.8
3/8×1/2 17.1 10.3 64 2.3 3.2 4.0 6.4 1.7 2.4 3.2 4.8
3/8×1/4 17.1 13.7 64 2.3 3.2 4.0 6.4 2.2 3.0 3.7 6.1
1/2×1/8 21.3 10.3 70 2.8 3.7 4.7 7.5 1.7 2.4 3.2

4.8

1/2×1/4 21.3 13.7 70 2.8 3.7 4.7 7.5 2.2 3.0 3.7 6.1
1/2×3/8 21.3 17.1 70 2.8 3.7 4.7 7.5 2.3 3.2 4.0 6.4
3/4×1/8 26.7 10.3 76 2.9 3.9 5.5 7.8 1.7 2.4 3.2 4.8
3/4×1/4 26.7 13.7 76 2.9 3.9 5.5 7.8 2.2 3.0 3.7 6.1
3/4×3/8 26.7 17.1 76 2.9 3.9 5.5 7.8 2.3 3.2 4.0 6.4
3/4×1/2 26.7 21.3 76 2.9 3.9 5.5 7.8 2.8 3.7 4.7 7.5
1×1/8 33.4 10.3 89 3.4 4.5 6.4 9.1 1.7 2.4 3.2 4.8
1×1/4 33.4 13.7 89 3.4 4.5 6.4 9.1 2.2 3.0 3.7 6.1
1×3/8 33.4 17.1 89 3.4 4.5 6.4 9.1 2.3 3.2 4.0 6.4
1×1/2 33.4 21.3 89 3.4 4.5 6.4 9.1 2.8 3.7 4.7 7.5
1×3/4 33.4 26.7 89 3.4 4.5 6.4 9.1 2.9 3.9 5.5 7.8
1¼×1/8 42.2 10.3 102 3.6 4.9 6.4 9.7 1.7 2.4 3.2 4.8
1¼×1/4 42.2 13.7 102 3.6 4.9 6.4 9.7 2.2 3.0 3.7 6.1
1¼×3/8 42.2 17.1 102 3.6 4.9 6.4 9.7 2.3 3.2 4.0 6.4
1¼×1/2 42.2 21.3 102 3.6 4.9 6.4 9.7 2.8 3.7 4.7 7.5
1¼×3/4 42.2 26.7 102 3.6 4.9 6.4 9.7 2.9 3.9 5.5 7.8
1¼×1 42.2 33.4 102 3.6 4.9 6.4 9.7 3.4 4.5 6.4 9.1
1½×1/8 48.3 10.3 114 3.7 5.1 7.1 10.2 1.7 2.4 3.2 4.8
1½×1/4 48.3 13.7 114 3.7 5.1 7.1 10.2 2.2 3.0 3.7 6.1
1½×3/8 48.3 17.1 114 3.7 5.1 7.1 10.2 2.3 3.2 4.0 6.4
1½×1/2 48.3 21.3 114 3.7 5.1 7.1 10.2 2.8 3.7 4.7 7.5
1½×3/4 48.3 26.7 114 3.7 5.1 7.1 10.2 2.9 3.9 5.5 7.8
1½×1 48.3 33.4 114 3.7 5.1 7.1 10.2 3.4 4.5 6.4 9.1
1½×1¼ 48.3 42.2 114 3.7 5.1 8.7 10.2 3.6 4.9 6.4 9.7
2×1/8 60.3 10.3 165 3.9 5.5 8.7 11.1 1.7 2.4 3.2 4.8
2×1/4 60.3 13.7 165 3.9 5.5 8.7 11.1 2.2 3.0 3.7 6.1
2×3/8 60.3 17.1 165 3.9 5.5 8.7 11.1 2.3 3.2 4.0 6.4
2×1/2 60.3 21.3 165 3.9 5.5 8.7 11.1 2.8 3.7 4.7 7.5
2×3/4 60.3 26.7 165 3.9 5.5 8.7 11.1 2.9 3.9 5.5 7.8
2×1 60.3 33.4 165 3.9 5.5 8.7 11.1 3.4 4.5 6.4 9.1
2×1¼ 60.3 42.2 165 3.9 5.5 8.7 11.1 3.6 4.9 6.4 9.7
2×1½ 60.3 48.3 165 3.9 5.5 8.7 11.1 3.7 5.1 7.1 10.2
2½×1/8 73.0 10.3 178 5.2 7.0 9.5 14.0 1.7 2.4 3.2 4.8
2½×1/4 73.0 13.7 178 5.2 7.0 9.5 14.0 2.2 3.0 3.7 6.1
2½×3/8 73.0 17.1 178 5.2 7.0 9.5 14.0 2.3 3.2 4.0 6.4
2½×1/2 73.0 21.3 178 5.2 7.0 9.5 14.0 2.8 3.7 4.7 7.5
2½×3/4 73.0 26.7 178 5.2 7.0 9.5 14.0 2.9 3.9 5.5 7.8
2½×1 73.0 33.4 178 5.2 7.0 9.5 14.0 3.4 4.5 6.4 9.1
2½×1¼ 73.0 42.2 178 5.2 7.0 9.5 14.0 3.6 4.9 6.4 9.7
2½×1½ 73.0 48.3 178 5.2 7.0 9.5 14.0 3.7 5.1 7.1 10.2
2½×2 73.0 60.3 178 5.2 7.0 9.5 14.0 3.9 5.5 8.7 11.1
3×1/8 88.9 10.3 203 5.5 7.6 11.5 15.2 1.7 2.4 3.2 4.8
3×1/4 88.9 13.7 203 5.5 7.6 11.5 15.2 2.2 3.0 3.7 6.1
3×3/8 88.9 17.1 203 5.5 7.6 11.5 15.2 2.3 3.2 4.0 6.4
3×1/2 88.9 21.3 203 5.5 7.6 11.5 15.2 2.8 3.7 4.7 7.5
3×3/4 88.9 26.7 203 5.5 7.6 11.5 15.2 2.9 3.9 5.5 7.8
3×1 88.9 33.4 203 5.5 7.6 11.5 15.2 3.4 4.5 6.4 9.1
3×1¼ 88.9 42.2 203 5.5 7.6 11.5 15.2 3.6 4.9 6.4 9.7
3×1½ 88.9 48.3 203 5.5 7.6 11.5 15.2 3.7 5.1 7.1 10.2
3×2 88.9 60.3 203 5.5 7.6 11.5 15.2 3.9 5.5 8.7 11.1
3×2½ 88.9 73.0 203 5.5 7.6 11.5 15.2 5.2 7.0 9.5 14.0
3½×1/8 101.6 10.3 203 5.7 8.1     1.7 2.4 3.2 4.8
3½×1/4 101.6 13.7 203 5.7 8.1     2.2 3.0 3.7 6.1
3½×3/8 101.6 17.1 203 5.7 8.1     2.3 3.2 4.0 6.4
3½×1/2 101.6 21.3 203 5.7 8.1     2.8 3.7 4.7 7.5
3½×3/4 101.6 26.7 203 5.7 8.1     2.9 3.9 5.5 7.8
3½×1 101.6 33.4 203 5.7 8.1     3.4 4.5 6.4 9.1
3½×1¼ 101.6 42.2 203 5.7 8.1     3.6 4.9 6.4 9.7
3½×1½ 101.6 48.3 203 5.7 8.1     3.7 5.1 7.1 10.2
3½×2 101.6 60.3 203 5.7 8.1     3.9 5.5 8.7 11.1
3½×2½ 101.6 73.0 203 5.7 8.1     5.2 7.0 9.5 14.0
3½×3 101.6 88.9 203 5.7 8.1     5.5 7.6 11.5 15.2
4×1/4 114.3 13.7 229 6.0 8.6 13.5 17.1 2.2 3.0 3.7 6.1
4×3/8 114.3 17.1 229 6.0 8.6 13.5 17.1 2.3 3.2 4.0 6.4
4×1/2 114.3 21.3 229 6.0 8.6 13.5 17.1 2.8 3.7 4.7 7.5
4×3/4 114.3 26.7 229 6.0 8.6 13.5 17.1 2.9 3.9 5.5 7.8
4×1 114.3 33.4 229 6.0 8.6 13.5 17.1 3.4 4.5 6.4 9.1
4×1¼ 114.3 42.2 229 6.0 8.6 13.5 17.1 3.6 4.9 6.4 9.
4×1½ 114.3 48.3 229 6.0 8.6 13.5 17.1 3.7 5.1 7.1 710.2
4×2 114.3 60.3 229 6.0 8.6 13.5 17.1 3.9 5.5 8.7 11.1
4×2½ 114.3 73.0 229 6.0 8.6 13.5 17.1 5.2 7.0 9.5 14.0
4×3 114.3 88.9 229 6.0 8.6 13.5 17.1 5.5 7.6 11.5 15.2
4×3½ 114.3 101.6 229 6.0 8.6 13.5 17.1 5.7 8.1